2020 Webinar Series -- MBD Through PLM Part 2 -
Control Perceived Quality with 3DEXPERIENCE Live Rendering
When: February 27th, Thursday, 2020
Time: 11:00 am EST to 12:00 pm EST
Featuring guest presenter Daniel Dresemann, Dassault Systemes Technical Specialist, February's webinar will showcase how design and engineering can communicate and collaborate using Spec Studies in the 3DEXPERIENCE Platform.
This free webinar event will demonstrate how to use Live Rendering in 3DEXPERIENCE along with 3DCS Spec Studies to display tolerance scenarios on your product. As part of the webinar, Daniel will show how to utilize the 3DEXPERIENCE Platform's Live Rendering to visualize gap and flush conditions in order to determine acceptable tolerance objectives. This will be compared to Spec Studies created from Tolerance Stack Up outputs, called Variation Studies, to see whether the objectives chosen by the design team can be met by the manufacturing engineer's specifications.
Once compared, the two teams can collaborate using the model as a source of visualizing their points and outputs, and come to a compromise on specifications and tolerances for a given design. Doing this early in the digital phase also gives engineers and designers more tools to work with, as making design changes before any tools are cut is as simple as a click of the mouse.
3DCS for the 3DEXPERIENCE Platform
3DCS Variation Analyst for 3DEXPERIENCE is an integrated software solution in CATIA 3DEXPERIENCE that simulates product assembly and part tolerance 3D stack-ups through Monte Carlo Analysis and High-Low-Mean (Sensitvity) Analysis.
3DCS for 3DEXPERIENCE simulates part and process variation with Monte Carlo Simulation to give statistical outputs showing the estimated percent of products that will be out-of-spec, the primary contributing tolerances and parts to variation issues and specified statistical measures such cpk and ppk.
- What is Perceived Quality (PQ)?
- How does PQ Connect Design and Engineering?
- Process Workflow
- Review Spec Studies with Live Rendering
- FTA and MBD Variation Study
- Compare and Collaborate on Results
- Update Model Based on Design and Engineering Decisions
Join the Webinar FREE and Get the Recorded Session